Signal Surge Protector SPD: Protect Data Lines

Prodcuts Catalog

Signal Surge Protector SPD

The Signal Surge Protector SPD protects electrical surges within transmission signal systems to extend the operational lifetime of delicate equipment. These devices constitute essential safety elements that protect the operation of data communication systems as well as telecommunication lines and control and monitoring systems. The devices help maintain data integrity through power surge protection and enable continuous signal flow and save critical structures from surge-related damage.

RJ45 Lightning Surge Protector -BS RJ45E WP G48

BS RJ45E WP G48 630038 1. ldeally suited for retrofitting, protection of all lines. 2. Cat.6 in the channel(class E). 3. Power over Ethernet lEEE 802.3 compliant (up to PoE++ /4P PoE). 4. For installation in conformity with the lightning protection zone concept at the boundaries from 0B -2 and higher. 5. Good discharge capacity, low voltage protection level. 6. Quick response, high transmission speed, low siqnal attenuation. 7. Fully shielded RJ45 socket, 35mm standard guide rail, easy to install.

RJ45 Ethernet Surge Protector

RJ45 Surge Protector -BS RJ45G 24(A)

BS RJ45G 24(A) 630006 1. ldeally suited for retrofitting, protection of all lines. 2. Cat.6 in the channel(class E). 3. For installation in conformity with the lightning protection zone concept at the boundaries from 0B -2 and higher. 4. Good discharge capacity, low voltage protection level. 5. Quick response, high transmission speed, low siqnal attenuation. 6. Fully shielded RJ45 socket, 35mm standard guide rail, easy to install.

RJ45 Ethernet Surge Protector

CAT6 Surge Protection -BS RJ45G 48-90W(A)

BS RJ45G 48-90W(A) 630095 1. ldeally suited for retrofitting, protection of all lines. 2. Cat.6 in the channel(class E). 3. Power over Ethernet lEEE 802.3 compliant (up to PoE++ /4P PoE). 4. For installation in conformity with the lightning protection zone concept at the boundaries from 0B -2 and higher. 5. Good discharge capacity, low voltage protection level. 6. Quick response, high transmission speed, low siqnal attenuation. 7. Fully shielded RJ45 socket, 35mm standard guide rail, easy to install. 8. The nominal current can reach 3A and the load power can reach 90W.

RJ45 Ethernet Surge Protector

Surge Arrester Types-BS SKW SHFD 24

BS SKW SHFD 24 610271 1. Small size, only 6mm wide module. 2. Connected to earth by DlN rail or earth terminal.

Measuring & Controlling System Surge Protector

D-Sub Connector Surge Protection -BS RS 9P

BS RS 9P 640019 1.High discharge capacity, low voltage protection level, quick response. 2.Does not impact the normal work of data management devices and system. 3.Apply for high speed transmission devices. 4. 9-Pin for surge arrester full protected.

Surge Protector For D-Sub Technology

10G Ethernet Surge Protector POE -BS 10G EA 4PPOE

BS 10G EA 4PPOE 630230 1. For protecting computer data transmission system, network system and so on. 2. Ideal for protecting Ethernet applications up to 10GBit/s. 3. Good discharge capacity, low voltage protection level. 4. Quick response, high transmission speed, low siqnal attenuation. 5. Metallic enclosure design is use RJ45 connectors, easy for installation. 6. Optional with DIN rail installation. 7. 10/100/1000/10000Mb(10G) Data Rate. 8. CAT5.CAT5e.CAT6.CAT6a,CAT7 Compatible. 9. 802.3af,802.3at,802.3bt and Passive PoE Compatible. 10. PoE.PoE+,PoE++ and 4PPOE Compatible.

RJ45 Ethernet Surge Protector

Signal Surge Protector SPD

The surge protectors operate efficiently with high-energy surges and maintain signal quality to provide consistent performance. Surge protectors are vital elements in telecom lines and Ethernet networks and security systems because they protect infrastructure from surge damage while maintaining signal integrity.