High Frequency Surge Protector -BS SHFD 5

High-Frequency Surge Protector BS SHFD 5(610040) functions as a protection solution that can be placed within LPZ 0A-2 or higher or immediately next to protected devices at their upstream portion. This protector system gives protection to two separate single lines that share reference potentials and high-frequency bus systems together with video transmission lines. Designed according to lEC 61643-21； EN61643-21; GB 18802.21.

Type

BS SHFD 5
Art.-No.

610040
Features

1. For mounting on the 35mm DIN rail . 2. Composed by two parts: the base and the protection module. 3. The signal will not be disconnected when replacing the module. 4. High discharge capacity, low voltage protection level.

Inquiry

Download Datasheet

Surge Protector for High-Frequency Control Systems

35mm DIN Rail，EN 60715

0-20mA, 4-20mA

Pluggable Design

For 2 signal lines in measuring and control system

high-frequency surge protector

The designed purpose of the High-Frequency Surge Protector consists of safeguarding electrical devices against high-frequency surges lightning strikes and transient overvoltages. This device defends devices rapidly during the nanosecond to prevent electrical harm. The surge protector provides ideal protection to RF communication systems together with laboratory equipment medical devices and industrial sensors through its combination of a multi-stage protective circuit design with high-quality GDT and MOV components.

High Frequency Surge Protector - Advanced Protection for Sensitive Equipment

The High Frequency Surge Protector was designed as a protective shield that defends delicate electronics against high-frequency power surges together with transient overvoltages. Equipment operating in industrial commercial and residential locations has stable and uninterrupted performance through this protection device.

Surge Protection for High-Frequency Signals

Key Features:

Noise and Surge Filtering: Additional circuits remain protected from high-frequency noise and surges because this protection system effectively filters and then absorbs these disturbances.
Wide Compatibility: Ideal for precision equipment, such as medical devices, communication systems, and industrial control systems.
Fast Response Time: Maximum safety is ensured by this device through its fast response time, which operates at less than one nanosecond range.
Durable Design: Built with high-quality, flame-resistant materials to withstand challenging environments.

Technical Specifications

Frequency Range: The device works between 1 MHz and 1 GHz frequencies together with extended frequency options.
Surge Protection Capability: Reaches 10 kA with 8/20 μs waveform depending on the selected model.
Insertion Loss: ≤0.5 dB
Input Voltage Range: Can run using AC/DC power between 12V, 24V, 48V, and higher (down to a client's specific needs).
Connection Type: BNC, N-type, SMA, or other high-frequency connectors.

High Frequency Transient Surge Protector

Technical Data

Product Showcase

Start Your Project

We will respond to you within 24 hours after receiving your request email.

3 Years Warranty
Free Customized Design
Welcome OEM and ODM Service
CE RoHS CB KEMA TUV Certificates
Surge Protecetive Device（SPD）Factory
30+ Years Surge Protector SPD Experiences

Type	BS SHFD 5	BS HFD 5	BS SHFD 24	BS HFD 24
Art.-No.	610040	610049	610041	610050
Nominal voltage d.c. [U_N]	5V	5V	24V	24V
Rated voltage(max. continuous d.c. voltage) [U_c]	6V	6V	33V	33V
Rated voltage(max. continuous a.c. voltage) [U_c]	4.2V	4.2V	21.5V	23.3V
Nominal current [I_L]	1A	1A	1A	1A
Lightning impulse current (10/350μs) (per line)[Iimp]	2.5kA	2.5kA	2.5kA	2.5kA
Lightning impulse current (10/350μs) (total) [Iimp]	5kA	5kA	5kA	5kA
Nominal discharge current (8/20μs) (per line) [In]	10kA	10kA	10kA	10kA
Nominal discharge current (8/20μs) (total) [In]	20kA	20kA	20kA	20kA
Voltage protection level at Iimp (line-line) [Up]	≤ 26V	≤ 25V	≤67V	≤ 65V
Voltage protection level at Iimp (line-PG) [Up]	≤ 40V	≤ 550V	≤ 600V	≤ 550V
Voltage protection level at 1kV/us (line-line)/(line-PG) [Up]	≤ 11V/ ≤ 11V	≤ 11V/ ≤ 550V	≤ 47V/ ≤ 550V	≤ 47V/ ≤ 550V
Transmission range [F]	100MHz	100MHz	100MHz	100MHz
Series impedance (per line) [R]	1.0Ω	1.0Ω	1.0Ω	1.0Ω
Capacitance (line-line) / (line-PG) [C]	≤ 20nF/ ≤25nF	≤ 25nF/ ≤ 16nF	≤ 25nF/ ≤ 25nF	≤ 25nF/ ≤ 16nF
Response time [t_A](line-line) / (line-PG)	≤ 1ns/≤ 1ns	≤ 1ns/≤ 100ns	≤ 1ns/≤ 1ns	≤ 1ns/≤ 100ns
Operating temperature range [Tu]	-40°C…+80°C
Cross-sectional area	0.08mm²-4mm² solid / 2.5mm² flexible
Mounting on	35mm DIN rail, EN 60715
Place of installation	Indoor
Enclosure material	Orange thermoplastic, UL94-V0
Test standards	IEC 61643-21; EN 61643.21; GB 18802.21
Certification	CE; RoHS; ISO 9001:2015;REACH