High Frequency Surge Protector for Sensitive Electronic Devices
search
Contact Us
Contact Us
High Frequency Surge Protector -BS SHFD 5
  • Overview
  • Features
  • Datasheet
  • Showcase
  • Inquiry

High Frequency Surge Protector -BS SHFD 5

High-Frequency Surge Protector BS SHFD 5(610040) functions as a protection solution that can be placed within LPZ 0A-2 or higher or immediately next to protected devices at their upstream portion. This protector system gives protection to two separate single lines that share reference potentials and high-frequency bus systems together with video transmission lines. Designed according to lEC 61643-21； EN61643-21; GB 18802.21.

  • Type

    BS SHFD 5

  • Art.-No.

    610040

  • Features

    1. For mounting on the 35mm DIN rail . 2. Composed by two parts: the base and the protection module. 3. The signal will not be disconnected when replacing the module. 4. High discharge capacity, low voltage protection level.

Inquiry
Download Datasheet
High Frequency Surge Protector
DIN Rail High Frequency Surge Protector
Surge Protector for High-Frequency Control Systems
35mm DIN Rail，EN 60715
0-20mA, 4-20mA
Pluggable Design
For 2 signal lines in measuring and control system
high-frequency surge protector



The designed purpose of the High-Frequency Surge Protector consists of safeguarding electrical devices against high-frequency surges lightning strikes and transient overvoltages. This device defends devices rapidly during the nanosecond to prevent electrical harm. The surge protector provides ideal protection to RF communication systems together with laboratory equipment medical devices and industrial sensors through its combination of a multi-stage protective circuit design with high-quality GDT and MOV components.

High Frequency Surge Protector - Advanced Protection for Sensitive Equipment

The High Frequency Surge Protector was designed as a protective shield that defends delicate electronics against high-frequency power surges together with transient overvoltages. Equipment operating in industrial commercial and residential locations has stable and uninterrupted performance through this protection device.
Surge Protection for High-Frequency Signals

Key Features:

  • Noise and Surge Filtering: Additional circuits remain protected from high-frequency noise and surges because this protection system effectively filters and then absorbs these disturbances.
  • Wide Compatibility: Ideal for precision equipment, such as medical devices, communication systems, and industrial control systems.
  • Fast Response Time: Maximum safety is ensured by this device through its fast response time, which operates at less than one nanosecond range.
  • Durable Design: Built with high-quality, flame-resistant materials to withstand challenging environments.
High-Frequency Surge Protection Device

Technical Specifications

  • Frequency Range: The device works between 1 MHz and 1 GHz frequencies together with extended frequency options.
  • Surge Protection Capability: Reaches 10 kA with 8/20 μs waveform depending on the selected model.
  • Insertion Loss: ≤0.5 dB
  • Input Voltage Range: Can run using AC/DC power between 12V, 24V, 48V, and higher (down to a client's specific needs).
  • Connection Type: BNC, N-type, SMA, or other high-frequency connectors.
High Frequency Transient Surge Protector

Technical Data

Product Showcase

HF Surge Protector
High Frequency Surge Suppressor
High Frequency Surge Protection

Start Your Project

We will respond to you within 24 hours after receiving your request email.
  • icon_check 3 Years Warranty
  • icon_check Free Customized Design
  • icon_check Welcome OEM and ODM Service
  • icon_check CE RoHS CB KEMA TUV Certificates
  • icon_check Surge Protecetive Device（SPD）Factory
  • icon_check 30+ Years Surge Protector SPD Experiences

    Get Free Catalog

    WhatsApp