Control System Surge Protector -BS L CD

A Control System Surge Protector BS L CD protects unbalanced interfaces having two single wires that serve measuring and controlling operations. This protector serves field buses and 0-20mA and 4-20mA control lines through their input/output functions in compliance with IEC 61643-21 and EN61643-21 and GB 18802.21.

Type

BS L CD
Features

1. For mounting on the 35mm DIN rail. 2. Composed by two parts: the base and the protection module. 3. The signal will not be disconnected when replacing the module. 4. High discharge capacity, low voltage protection level.

Inquiry

Download Datasheet

IEC Certified Control System Surge Protector

Control System Surge Protection for Automation Systems

35mm DIN Rail，EN 60715

0-20mA, 4-20mA

Pluggable Design

For 2 signal lines in measuring and control system

High Daicharge Capacity

The high-performance BS L CD Control System Surge Protector from Protect All functions as a protection device against power surges and transient overvoltages for industrial and commercial control systems. This protection device responds within less than 1 nanosecond and exhibits a powerful construction to safeguard PLCs, SCADA systems, sensors, and other automation equipment.

Control System Surge Protector

The Control System Surge Protector exists to protect industrial and commercial control systems against power surges as well as transient overvoltages. The device stops equipment damage from power variations and failures and lightning strikes through its protective functions which preserve control systems' operational stability and prevent equipment breakdowns.

Surge Protection for Process Control Systems

Key Features:

High Efficiency: The surge protection system features high efficiency to eliminate electrical impacts from both power surges and transient voltage variations, which protects control system equipment.
Fast Response Time: Can immediately respond to surges by isolating power impacts, ensuring the safety of equipment.
Low Voltage Trigger Protection: Enables automatic safety activation by set limits to shield equipment from harm caused by overvoltage.

Surge Protector for Industrial Control Systems

Applications:

Industrial Control Systems: Supports industrial control systems and automation equipment as well as machinery control systems to maintain continuous operational stability.
Energy Sector: Protects power equipment, wind turbines, solar power systems, and other devices from power grid fluctuations.
Building Control: Surge systems in building control protect fire safety systems, building control systems, elevator control systems, and more components in infrastructure.
Telecommunications: Protects base stations, network equipment, communication lines, and additional telecommunications devices against electrical damage.
Transportation: Used for surge protection in traffic signal systems, railway control systems, and similar applications.

Surge Protection Device for Control Systems

Technical Data

Nominal voltage d.c. [U_N]	5V	12V	15V	24V	48V	60V	110V
Rated voltage(max. continuous d.c. voltage) [U_c]	6V	15V	15V	33V	54V	70V	180V
Rated voltage(max. continuous a.c. voltage) [U_c]	4.2V	10.5V	18V	26V	38.2V	49.5V	130V
Nominal current [I_L]	1A	0.75A	0.75A	0.75A	0.75A	1A	1A
Lightning impulse current (10/350μs) (per line)[Iimp]	2.5kA	2.5kA	2.5kA	2.5kA	2.5kA	2.5kA	2.5kA
Lightning impulse current (10/350μs) (total) [Iimp]	5kA	5kA	5kA	5kA	15kA	5kA	5kA
Nominal discharge current (8/20μs) (per line) [In]	10kA	10kA	10kA	10kA	10kA	10kA	10kA
Nominal discharge current (8/20μs) (total) [In]	20kA	20kA	20kA	20kA	20kA	20kA	20kA
Voltage protection level at Iimp (line-line) [Up]	≤ 25V	≤ 50V	≤ 90V	≤102V	≤ 160V	≤ 220V	≤ 520V
Voltage protection level at Iimp (line-PG) [Up]	≤ 27V	≤ 37V	≤ 70V	≤ 66V	≤ 95V	≤ 125V	≤ 300V
Voltage protection level at 1kV/us (line-line)/(line-PG) [Up]	≤ 18V/ ≤ 90V	≤ 38V/ ≤ 19V	≤ 50V/ ≤ 25V	≤ 90V/ ≤ 45V	≤ 140V/ ≤ 70V	≤ 180V/ ≤ 90V	≤ 500V/ ≤ 250V
Transmission range [F]	1.0MHz	2.7MHz	3.8MHz	6.8MHz	8.7MHz	9.0MHz	25.0MHz
Series impedance (per line) [R]	1.8Ω	1.8Ω	1.8Ω	1.8Ω	1.8Ω	1.8Ω	1.8Ω
Open circuit voltage（1.2/50μs）	10kV	10kV	10kV	10kV	10kV	10kV	10kV
Capacitance (line-line) / (line-PG) [C]	≤ 2.71nF/ ≤5.41nF	≤ 1.0nF/ ≤2.0nF	≤ 0.9nF/ ≤1.8nF	≤ 0.5nF/ ≤ 1.0nF	≤ 0.35nF/ ≤ 0.7nF	≤ 250nF/ ≤ 500nF	≤ 120nF/ ≤ 240nF
Response time [t_A](line-line) / (line-PG)	≤ 1ns/≤ 1ns	≤ 1ns/≤ 1ns	≤ 1ns/≤ 1ns	≤ 1ns/≤ 1ns	≤ 1ns/≤ 1ns	≤ 1ns/≤ 1ns	≤ 1ns/≤ 1ns
Type	BS L CD
Art.-No.	612001
Operating temperature range [Tu]	-40°C…+80°C
Cross-sectional area	0.08mm²-4mm² solid / 2.5mm² flexible
Mounting on	35mm DIN rail, EN 60715
Place of installation	Indoor
Enclosure material	Orange thermoplastic, UL94-V0
Test standards	IEC 61643-21; EN 61643.21; GB 18802.21
Certification	CE; RoHS; ISO 9001:2015;REACH