Type 1 SPD -BT BCM 25 RM/2P
Type 1 SPD BT BCM 25 RM/2P(801032) is designed to protect low voltage devices from lightning and surge damages, specially designed for class l TN 220V/230V AC systems (“2+0” circuits), mainly used in power supply systems such as power distribution-room,distribution-cabinet, and other important power supply system. Designed according to IEC 61643-11:2011; EN 61643-11:2012; GB 18802.1-2011.
-
Type
BT BCM 25 RM/2P
-
Art.-No.
801032
Inquiry
Download Datasheet
Location of Use:
Main Distribution Boards
Main Distribution Boards
System Type:
Single Phase，TN
Single Phase，TN
Modules:
2P
2P
Protection Elements:
High Energy GDT
High Energy GDT
High Surge Currents:
limp= 25 kA (10/350μs)， Imax=100kA(8/20μs)
limp= 25 kA (10/350μs)， Imax=100kA(8/20μs)
The Type 1 SPD BT BCM 25 RM/2P shields facilities low voltage systems against damage through lightning and surges. For single-phase TN power system, is ideal for giving basic protection at power distribution points. With high surge capability, Power Strip Surge Protector provides system reliability in industrial, commercial, and residential markets. It provides good protection from transient overvoltage, and more so from a lightning strike. Highly efficient and reliable to meet the protection requirement of electrical equipment.
Type 1 SPD
SPD – Type 1 – is a kind of TOV (Transient Overvoltage Protector) that functions as transient overvoltage protective equipment against lightning or voltage surges. Lemming power protection devices can therefore be categorized as the first line of defense since they help to manage surges which can be very dangerous at the power point entry process thus helping to provide safety and reliability of electrical supply to industries, commercial buildings, and residential homes.
Features
Type 1 SPD provides unipolar immunity generally on a large scale to limit overvoltage events for example lightning currents. It offers high breakdown voltage to protect electrical systems when high surge voltages occur. It is usually placed at the primary distribution center or the primary cable access point to guarantee safe operation and correct system performance.
How it works
Typically the first type of SPD diverts voltage peaks from overvoltage sources such as lighting to safer limits and safeguard personal electrical instruments. It quickly performs and releases any form of voltage that is superfluous to the flux, which prevents danger and contributes to the security and reliability of the current system. Type 1 SPD for Electrical System
Scope of application
For use in premises requiring high-protection electrical systems in homes, offices, or factories. Popular for use in areas that are most likely to be affected by lightning or where equipment is very sensitive to surge voltage for guaranteed system protection. The first choice for protecting a distributed power system is through the use of a Primary Surge Protection Device /Type 1 SPD/.
Installation Requirements
Type 1 SPD must be installed by the current standards and regulations concerning the PROtect wiring. Hence, to advance the neutrality plane as a means of discharging overvoltage and protecting electrical systems, it is mandatory to achieve a secure connection to the grounding system. Lightning strike Type 1 Surge Protector
Technical Data
Product Showcase
Mounting
Start Your Project
We will respond to you within 24 hours after receiving your request email.
-
3 Years Warranty -
Free Customized Design
-
Welcome OEM and ODM Service
-
CE RoHS CB KEMA TUV Certificates
-
Surge Protecetive Device（SPD）Factory
-
30+ Years Surge Protector SPD Experiences
