Surge Protector for Ethernet Devices（BS RJ45G 48 4P）
Surge Protector for Ethernet Devices（BS RJ45G 48 4P）
Surge Protection BS RJ45G 48(4P)(630025) Ethernet Surge Protector POE SPD is for Installation at LPZ 0B-2 or higher, directly installed in the front near the equipment; according to IEC standard for CAT6 or IEEE 802.3at or Class E integrated wiring system; all the industrial Ethernet 10M, 100M, 1000M or higher network surge protection; the nominal current, continuous DC high voltage, to support the PoE network with power supply system. This surge protector device uses an RJ45 interface protected by four pairs of lines. Compliant with both the IEC 61643-21 standard as well as the EN 61643-21 standard, as well as the GB/T 18802.21 standard.
-
Type
BS RJ45G 48(4P)
-
Art.-No.
630025
Inquiry
Download Datasheet
Support PoE++/4P PoE（90W) System
E10/E100/E1000 Mbps
Metallic Housing 4 Ports RJ45 Connection
Passed REACH Test Report
Wall installation
Surge Protector for Ethernet Devices BS RJ45G 48(4P)(630025) is for installation at LPZ 0B-2 or higher, directly installed front near the equipment; by IEC standard for CAT6 or IEEE 802.3at Or Class E integrated wiring system; all ES high-speed Industrial Ethernet 10M/100M/1000M or higher Network surge protection; nominal current, continuous this surge protector device employs RJ45 interface which is shielded by four pairs lines. Ethernet Surge Protector for Home Network prevents against power surges.
Surge Protector for Ethernet Devices(BS RJ45G 48 4P)
The BS RJ45G 48 4P Surge Protector protects the network devices from overvoltage and overcurrent because of a power surge or lightning. Moreover, it supports PoE++ systems with 48 ports, including safe and stable signal transmission. It also in the event of electrical interferences, cutoff power to protect the equipment in use. Specially designed for large scale networks, installing it is relatively easier and provides good protection.
Interface: BS RJ45G 48 4P
The BS RJ45G 48 4P is a 48 ports RJ45 network interface suitable for a large variety of networks. The 4P stands for four pairs of wires – this is the four-wire system for data transmission which guarantees reliable connection. The RJ45 interface type is most widely used for its consistency in Ethernet applications and to link about switches, routers and servers among other network devices. This interface helps to offer reliable and high-speed connectivity requirements for both domestic and business networking.
Working Principle
In case there is overcurrent or overvoltage in the network The Surge Protection Switch namely BS RJ45G 48 4P will switch off the power supply with the aim of protecting the hardware in the network. This switch has the capability to measure the voltage or current of any circuit and any abnormal condition and within milliseconds, it breaks the circuit and sends the power overflow to other parts rather than the computer bodies like routers and switches. Such prompt action makes certain that the network devices do not get damaged by power spikes, lightning, and other forms of electrical interferences so they have long-lasting and steady functionality.
Application
The Surge Protection Switch, BS RJ45G 48 4P, is applicable for home use, office use, and data center use. It safeguards network devices such as routers, switches, and servers from overcurrent or overvoltage caused by power surges lightning, or any electrical spikes. This surge protection switch proves effective across various contexts not only for home networks to protect expensive networking devices but also for enterprise infrastructures to extend their lifespan and improve their ability to perform.
Installation Method
The Surge Protection Switch (BS RJ45G 48 4P) can be directly installed in the Ethernet port of the network device while assisting easy connection of surge protection to the system. This provides for a rather simple usage and replacement of its components or even of the entire module as the user does not have to be a technical expert to set it up. It provides simple Ethernet protection to the network equipment; this means that devices will receive protection from issues such as power surges as well as other electrical interferences; all-around network reliability and security are boosted.
Precautions
Check on the Surge Protection Switch to confirm that it works well, as well as offers the said protection. For regions experiencing many thunderstorms or having a fluctuating voltage, it is advisable to have a Surge Protection Switch to protect all network devices from these main causes of destruction. For maximizing the performance of the equipment in sensitive environments, elegant maintenance and installation of the surge protection system yields benefits in minimizing the occurrence of equipment failure.
Technical Data
Product Showcase
Mounting
Start Your Project
We will respond to you within 24 hours after receiving your request email.
-
3 Years Warranty -
Free Customized Design
-
Welcome OEM and ODM Service
-
CE RoHS CB KEMA TUV Certificates
-
Surge Protecetive Device（SPD）Factory
-
30+ Years Surge Protector SPD Experiences
