Surge Protection Device For Elevators （BS LC 24 )
BS LC 24 (610005) surge protector is used to protect two single wires of unbalanced interfaces with a measuring and controlling system. For example, the field bus, and the 0-20mA, 4-20mA control line input/output interface. Les specifications conform to IEC 61643-21； EN61643-21； GB 18802.21.
-
Type
BS LC 24
-
Art.-No.
610 005
Inquiry
Download Datasheet
35mm DIN Rail
0-20mA, 4-20mA
Pluggable Design
For 2 signal lines in measuring and control system
High Daicharge Capacity
Surge Protection Device For Elevators lift mechanisms and any components vital to the operation of an elevator such as motors and controllers from another sudden surge in power. It maintains low and steady levels, and this results in very good flow because it does not allow voltage surges. So with this Ethernet Surge Protector, your elevator system remains effective as well as durable. Make sure your elevators are safe, every time.
BS LC 24
The specification of the device is named; BS LC 24, which stands for the British Standard for surge protection devices SPD for elevator systems. It prescribes how enhancement of surge protection of elevators is made possible through identifying the need for protecting elevator equipment such as the motor, and controller, among other parts prone to electrical surge impacts to ensure trust and minimal damage.
Elevator Surge Protector
The elevator surge protector helps protect equipment and systems used in elevators from electrical surges or spikes. It operates based on sensing variations in voltage or current and safely diverts surge voltage to the ground to protect the elevator’s diverse components, such as motors, controllers, and wiring, as well as to guarantee system performance.
Components
- Circuit Protection Devices: Metal oxide varistors (MOVs), diodes, and other devices that will shunt the voltage and therefore protect the system from any surge current.
- Grounding Wire: This comes with a specific feature to direct the surge voltage to the ground in order to protect the equipment.
- Connection Wires: There is a need to connect the surge protector to the elevator system to maintain adequate protection against electrical surges.
Installation Requirements
- Location: This must be connected directly to the power input of the elevator electrical system so as to offer protection to the system against surges.
- Wiring: Installation of LAN wiring should follow the specified standard from the British Standard Institute BS LC 24 to eliminate wrong wire connections, which may result in poor surge protection and system hazards.
Maintenance and testing
- Proper Function: This approach involves making sure the surge protector is working properly and that the grounding wire is properly connected for the best results.
- Replacement: Where the surge protector is compromised for any reason, it then has to be replaced to meet the safety requirements required in the elevator system to avoid the damaging effects that might be caused by electrical surges.
Technical Data
Product Showcase
Mounting
Start Your Project
We will respond to you within 24 hours after receiving your request email.
-
3 Years Warranty -
Free Customized Design
-
Welcome OEM and ODM Service
-
CE RoHS CB KEMA TUV Certificates
-
Surge Protecetive Device（SPD）Factory
-
30+ Years Surge Protector SPD Experiences
